Lab 04/module 14: weathering and mass wasting

KINDLY USE THE SECOND OR THIRD DOCUMENT OF THE ANSWERS. 

Don't use plagiarized sources. Get Your Custom Essay on
Lab 04/module 14: weathering and mass wasting
Just from $5/Page
Order Essay

SCROLL DOWN FOR ANSWERS: USE the second document

Lab 05/MODULE 14: WEATHERING AND MASS WASTING

Note: Please refer to the GETTING STARTEDmodule to learn how to maneuver through, and how to answer the lab questions, in the Google Earth () component.

KEY TERMS

You should know and understand the following terms:

 

Avalanche

Frost wedging

Rockslide

Carbonation

Hydrolysis

Root wedging

Chemical Weathering

Landslide

Salt crystal growth

Debris flow

Mass wasting

Soil creep

Earthflow

Mechanical (Physical)Weathering

Solifluction

Exfoliation

Mudflow

Slump

Frost heaving

Oxidation

 

 

LAB MODULE LEARNING OBJECTIVES

After successfully completing this module, you should be able to accomplish the following tasks:

·         Identify erosional processes and features created by weathering and mass wasting

·         Identify depositional processes and features created by weathering and mass wasting

·         Examine the processes that create mass wasting landforms

·         Distinguish different weathering and mass wasting types

·         Calculate slope

·         Interpret the topographic profile of a landscape

 

INTRODUCTION

This module examines weathering and mass wasting. Topics includephysical weathering, chemical weathering, and mass wasting. While these topics may appear to be disparate, you will learn how they are inherently related.The modules start with four opening topics, or vignettes, which are found in the accompanying Google Earth file. These vignettes introduce basic concepts of the weathering and mass wasting. Some of the vignettes have animations, videos, or short articles that will provide another perspective or visual explanation for the topic at hand.After reading the vignette and associated links, answer the following questions. Please note that some links might take a while to download based on your Internet speed.

 

Expandthe INTRODUCTION folder and then check Topic 1: Introduction.

Read Topic 1:Introduction

Question 1: According to the website, which of the following factors influence the speed of landslides? (Check all that apply).

A.   Slope of ground

B.   Water content

C.   Volume of debris

D.   Time since last landslide

Read Topic 2: Weathering

Question 2: Other than the rock material, what are the two most important factors in chemical weathering?

A.   Water and slope of land

B.   Debris type and water

C.   Slope of land and temperature

D.   Water and temperature

Read Topic 3: Mass Wasting

Question 3: What does the presence of lichen on boulders tell scientists?

A.   It tells us the parent material of the debris

B.   It tells us the relative time of a mass wasting event

C.   It tells us what the slope of the land used to be

D.   It tells us what the moisture content was at the time of the mass wasting event.

Read Topic 4: Human Interaction

Question 4: What are the characteristics of areas generally considered to be safe from landslides? (Check all that apply)

A.   On flat areas away from slopes

B.   On hard, non-jointed bedrock that has not moved in the past

C.   At the base of minor drainage hollows

D.   At the top or along the nose of ridges, set back from the tops of slopes

 

Collapse and uncheck the INTRODUCTIONfolder.

GLOBAL PERSPECTIVE

Figure 1.The geography of weathering (Arbogast 2nd Ed.).

Double-click and selectGLOBAL PERSPECTIVE.

Figure 1 is a graph showing the dominant type of weathering based on annual precipitation and temperature. If a location has a mean annual temperature of 20°C and receives 190cm of precipitation yearly, you can plot these values (as denoted by the star) to see this location’s dominant weathering is strong chemical.

For Questions 5 to 8, type the location information provided into the Searchtab in Google Earth and pressEnter. When you arrive at your destination, use the chart in Figure 1, in conjunction with Google Earth, to answer each question. The mean annual temperature and precipitation are provided respectively, in the parentheses.

Question 5:         What is the dominant weathering In Bangkok, Thailand (28°C, 145cm)?

A.   Moderate chemical

B.   Strong chemical

C.   Moderate chemical with frost action

D.   Very slight weathering

Question 6:         What is the dominant weathering in New Delhi, India (25°C, 80cm)

A.   Moderate chemical

B.   Strong chemical

C.   Moderate chemical with frost action

D.   Strong physical

 

Question 7:         What is the dominant weathering at 19°10’21.78″N, 96° 7’59.77″W (25°C, 236cm)?

A.   Moderate chemical

B.   Strong chemical

C.   Moderate chemical with frost action

D.   Strong physical

Question 8:What is the dominant weathering at 58°18’7.00″N,134°25’11.00″W (5°C, 140cm)?

A.   Moderate chemical

B.   Strong chemical

C.   Moderate chemical with frost action

D.   Strong physical

Collapse and uncheck the GLOBAL PERSPECTIVE folder.

 

 

Weathering

Double-click WEATHERING, and then double‑click Mechanical Weathering.

Identify the dominant type of mechanical weathering at the following locations. Use the photo links in Google Earth to help you identify the type.

Double-click Feature A and then clickFeature A photo.

Question 9:Identify mechanical weathering at Feature A:

A.   Frost wedging

B.   Frost heaving

C.   Salt-crystal growth

D.   Exfoliation

Double-click Feature B and then clickFeature B photo.

Question 10:Identify mechanical weathering at Feature B:

A.   Frost wedging

B.   Frost heaving

C.   Salt-crystal growth

D.   Exfoliation

Double-click Feature C and then click Feature C photo.

Question 11:Identify mechanical weathering at Feature C:

A.   Frost wedging

B.   Frost heaving

C.   Salt-crystal growth

D.   Exfoliation

Collapse theMechanical Weathering folder.

Double-click Chemical Weathering.

Double-click Feature D and then click Feature D photo.

Question 12:Identify chemical weathering at Feature D:

A.   Hydrolysis

B.   Carbonation

C.   Oxidation

D.   Spheroidal

 

Double-click Feature Eand then clickFeature E photo.

Question 13:Identify chemical weathering at Feature E:

A.   Hydrolysis

B.   Carbonation

C.   Oxidation

D.   Spheroidal

Double-click Feature F and then click Feature F photo.

Question 14:Identify chemical weathering at Feature F:

A.   Hydrolysis

B.   Carbonation

C.   Oxidation

D.   Spheroidal

Collapse theChemical Weathering folder.

MASS WASTING

Expand theMASS WASTING folder.

Double-click and selectFeature G.

Select the dominant type of mass wastingat Feature G.

Question 15: Feature G: ________

A.   Slump

B.   Solifluction

C.   Landslide

D.   Rockfall

Question 16:Why did you pick the answer you did in Question 15?

A.   Because the image shows material that has rotated and moved down the slope along a concave plane relative to the surface.

B.   Because the image shows where freeze-thaw processes result in lobes of soil moving gradually downslope.

C.   Because the image shows the result of movement of soil and bedrock down a steep slope in response to gravity,

D.   Because the image shows rocks that suddenly slid down a mountainside

Double-click and selectFeature H.

Select the dominant type of mass wasting at Feature H.

Question 17: Feature H: _______

A.   Slump

B.   Solifluction

C.   Landslide

D.   Rockfall

Question 18: Why did you pick the answer you did in Question 17

A.   Because the image shows material that has rotated and moved down the slope along a concave plane relative to the surface.

B.   Because the image shows where freeze-thaw processes result in lobes of soil moving gradually downslope.

C.   Because the image shows the result of movement of soil and bedrock down a steep slope in response to gravity,

D.   Because the image shows rocks that suddenly slid down a mountainside

 

Double-click and selectFeature I and examine the area in September 1998. Use the historical imagery slider and advance the timeline to March 2007.

Select the dominant type of mass wasting at Feature I.

Question 19: Feature I: ______

A.   Slump

B.   Solifluction

C.   Landslide

D.   Rockfall

Question 20: Why did you pick the answer you did in Question 19?

A.   Because the image shows materialthat has rotated and moved down the slope along a concave plane relative to the surface.

B.   Because the image shows where freeze-thaw processes result in lobes of soil moving gradually downslope.

C.   Because the image shows the result of movement of soil and bedrock down a steep slope in response to gravity,

D.   Because the image shows rocks that suddenly slid down a mountainside

 

 Double-click and select Slope 1. Right click the title Slope 1, and then select Show Elevation Profile.

Place your cursor over the elevation profile chart and compute the slope of the lines. Recall that the equation for slope is RISE/RUN and that the units must be the same when dividing (that is, both in meters).

Question 21: What is the RISE (Elevation gain) in meters?

A.   738 meters

B.   190 meters

C.   46.7 meters

D.   25.4 meters

Question 22: What is the RUN of the line (Distance) in meters?

A.   738 meters

B.   190 meters

C.   46.7 meters

D.   25.4 meters

Question 23:Based on the answers in Questions 21 and 22, what is the average slope of the line? 

A.   738 %

B.   190 %

C.   46.7 %

D.   25.4 %

Double-click and select Feature J. Examine the area in July 1998. Use the historical imagery slider and advance the timeline to February 2003.

Select the dominant type of mass wasting at Feature J.

Question 24: Feature J: ______

A.   Slump

B.   Debris flow

C.   Mudflow

D.   Soil Creep

Question 25: Why did you pick the answer you did in Question 24?

A.   Because the images show materialthat has rotated and moved down the slope along a concave plane relative to the surface.

B.   Because the images show the results of a rapidly flowing and extremely powerful mass of water, rocks, sediment, boulders, and trees.

C.   Because the images show the results of a well-saturated and highly fluid mass of fine-textured sediment

D.   Because the images show the result of a gradual downhill movement of soil,trees, and rocks due to the force of gravity.

Double-click and select Feature K.

Select the dominant type of mass wasting at Feature K.

Question 26: Feature K: ________

A.   Slump

B.   Debris flow

C.   Mudflow

D.   Soil Creep

Question 27: Why did you pick the answer you did in Question 26?

A.   Because the images show materialthat has rotated and moved down the slope along a concave plane relative to the surface.

B.   Because the images show the results of a rapidly flowing and extremely powerful mass of water, rocks, sediment, boulders, and trees.

C.   Because the images show the results of a well-saturated and highly fluid mass of fine-textured sediment

D.   Because the images show the result of a gradual downhill movement of soil, trees, and rocks due to the force of gravity.

 Double-click and select Slope 2. Right click the title Slope 2, and then select Show Elevation Profile.

Place your cursor over the elevation profile chart and compute the slope of the lines. Recall that the equation for slope is RISE/RUN andthat the units must be the same when dividing (that is, both in meters).

Question 28: What is the RISE (Elevation gain) in meters?

A.   92.1 meters

B.   35.6 meters

C.   128 meters

D.   148 meters

Question 29: What is the RUN of the line (Distance) in meters?

A.   92.1 meters

B.   35.6 meters

C.   128 meters

D.   148 meters

Question 30:Based on the answers in Questions 28 and 29, what is the average slope of the line? 

A.   92.1 meters ÷ 92.1 meters x 100% = 100%

B.   35.6 meters ÷ 92.1 meters x 100% = 38.6%

C.   128 meters ÷ 148 meters x 100% = 86.5%

D.   35.6 meters ÷ 128 meters x 100% = 27.8%

Question 31: Which mass wasting event do you expect to travel faster (Feature I or K)? Why?

A.   Feature I because it is one of the fastest types of mass wasting

B.   Feature K because it is one of the fastest types of mass wasting

C.   Feature I because it is one of the slowest types of mass wasting

D.   Feature K because it is one of the slowest types of mass wasting

 

 

Order a unique copy of this paper
(550 words)

Approximate price: $22

Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

We are committed to making our customer experience enjoyable and that we are keen on creating conditions where our customers feel secured and respected in their interactions with us.
With our qualified expert team who are available 24/7, we ensure that all our customer needs and concerns are met..

Money-back guarantee

Our refund policy allows you to get your money back when you are eligible for a refund. In such a case, we guarantee that you will be paid back to your credit card. Another alternative we offer you is saving this money with us as a credit. Instead of processing the money back, keeping it with us would be an easier way to pay for next the orders you place

Read more

Zero-plagiarism guarantee

All orders you place on our website are written from scratch. Our expert team ensures that they exercise professionalism, the laid down guidelines and ethical considerations which only allows crediting or acknowledging any information borrowed from scholarly sources by citing. In cases where plagiarism is confirmed, then the costumier to a full refund or a free paper revision depending on the customer’s request..

Read more

Free-revision policy

Quality is all our company is about and we make sure we hire the most qualified writers with outstanding academic qualifications in every field. To receive free revision the Company requires that the Customer provide the request within fourteen (14) days from the first completion date and within a period of thirty (30) days for dissertations.

Read more

Privacy policy

We understand that students are not allowed to seek help on their projects, papers and assignments from online writing services. We therefore strive to uphold the confidentiality that every student is entitled to. We will not share your personal information elsewhere. You are further guaranteed the full rights of originality and ownership for your paper once its finished.

Read more

Fair-cooperation guarantee

By placing an order with us, you agree to the service we provide. We will endear to do all that it takes to deliver a comprehensive paper as per your requirements. We also count on your cooperation to ensure that we deliver on this mandate.

Read more

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
$26
The price is based on these factors:
Academic level
Number of pages
Urgency